TimboryStatic – the solid wood structural panel

with building authority approval and CE-certification SWP / 3 load-bearing

TimboryStatic structural panels are primarily used in applications where increased static demands are to be combined with natural wood, for example:

Ceiling, wall and floor constructions with diaphragm action
Supporting/load bearing elements
Industrial floors
Prefabricated, (industrial) indoor facilities, agricultural buildings

The panel is suitable for exposed outdoor applications in accordance with Class 3 according to EN 1995-1-1, resists direct weathering and exposure to water or water vapor from ventilation where a moisture content of over 20% can be reached. These properties are only relevant for the glue quality of the board.

The natural properties of wood (warping, cracking, scaling and delamination caused by weather) also apply to TimboryStatic structural panels. For these reasons we recommend that the panels are used only in protected exterior applications (no direct sunlight or weathering). Please pay attention to provide suitable constructive wood protection. In principle standing water should be avoided for solid wood panels.

For exposed interior applications a constant room climate is most suitable for the natural wood properties.